Maintenance - Blastrac BMG-435WD Operating Manual

Work only with original Blastrac parts.
Check regularly to see if the diamond wings are in good condition. Replace immediately when these are
damaged or worn out.
Prevent premature wear by keeping the machine as dust free as possible, for this reason clean the machine
regularly with a dust collector (vacuum cleaner) especially the upper drive.
Clean the machine every day with air and non-aggressive materials. Never use a high pressure water cleaner
to clean the machine.
Store the cleaned and dry machine in a dry and humid free room. Protect the electrical motor from moisture,
heat, dust and shocks.
All repair work must to be done by qualified Blastrac personnel, this to guarantee a safe and reliable machine.
Any guarantee on the machine is automatically void when:
Non original Blastrac parts and or diamond discs have been used

Repair work is not done by qualified Blastrac personnel

Changes, add on's or conversions are undertaken without the written permission from Blastrac BV.


6. Maintenance

9