Safety; Safety Precautions; Safety Regulations - Blastrac BMG-435WD Operating Manual

Before operating the machine, the personnel who are going to use it must be familiar with the safety
instructions given in this manual.
Keep this manual near to the machine, so that it may be consulted.

Safety precautions

The surface to be treated must be swept clean to remove stones, screws etc.

Never use the machine when the surface is not clear and if there is a risk of tripping.

Make sure there is not any water on the surface to be treated.

Remove any trailing electrical cables and or dust hoses from the surface to be treated

Always use a dust collector

Don't get disturbed during the activities.


Safety regulations

Persons who are not operating the machine must not be permitted to stay in the surrounding area of

the machine.
Do not change anything on the machine. Always use cables that are approved and safety earthed.

Make sure that the machine is equipped with an earthed connection, do not change this and always
use earthed cables with an earthed plug.
Connect main power supply cable to an installation with an earth leakage circuit breaker.

Inspect and test the electrical components regularly. The electrical components have to satisfy the

requirements that apply to these components.
Always call a skilled electrician or your distributor when you have questions about the safety of the

electrical components.
Work on electrical equipment or operating materials may only be undertaken by a skilled electrician or

by trained persons under the guidance and supervision of a skilled electrician as well as in accordance
with the electrical engineering regulations.
Pull out the main plug during inspections and maintenance on the machine.

Never operate the machine when the surface is wet.

Never use the machine in the rain.

The machine contains rotating parts; because of this never pull the machine backwards with a turning

motor.
The following sticker is placed on the machine.
Meanings of these symbols are:
Ear protection is obligatory

Safety glasses with lateral protection are obligatory.

CE-mark on this machine

Safety shoes obligatory.

Consult the manual before operating the machine

Personnel must tie back long hair and not wear loose clothing or jewelry including rings.
Wear gloves and dust mask whilst operating the machine.

3. Safety

5