Introduction; Machine Description; Application; Accessories - Blastrac BMG-435WD Operating Manual

It is important that all persons who are working or maintaining this machine will read the manual carefully and
understand it fully. Keep this manual near to the machine, so it can always be consulted.
Only authorized and trained personnel may operate this machine.
The BMG-435WD is a small electrical driven planetary grinding machine. This is a three headed machine for
levelling and polishing of floors.
The patented drive system makes sure that this machine is very easy to handle.
The machine is simple to dismantle for ease of transportation.
Due to the water hose connection, it is possible to grind wet.

Application

The BMG-435WD can be used on almost any floor to plane, to make ready for coatings, or to remove coatings
or glue residues.
1 Steer
2 Switch
3 Swing arm for hose
4 Steer arm
5 Water hose connection

Accessories

There are several types of wings that may be used on this machine.
BG707301 Wing red box 9 pieces 18/20
BG707302 Wing red box 9 pieces 30/40
BG707303 Wing red box 9 pieces 60/80
BG707304 Wing red box 9 pieces 120/150
BG707311 Wing green box 9 pieces 18/20
BG707312 Wing green box 9 pieces 30/40
BG707313 Wing green box 9 pieces 60/80
BG707314 Wing green box 9 pieces 120/150
BG707321 Wing blue box 9 pieces 18/20
BG707322 Wing blue box 9 pieces 30/40
BG200997/set Wing PCD split
BG200999/set Wing PCD 2 x ¼

1. Introduction

2. Machine description

6 Motor
7 Fill up block
8 Drive mechanism
9 Hinge plate
10 Protection cover
11 Floating shroud
12 Brush for floating shroud
13 Diamond plate holders
14 Housing
15 Wheel frame
4