Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Blastrac BHG-1800
Summary of Contents for Blastrac BHG-1800
- Page 1 OPERATING MANUAL BHG-1800 VERSION 2.0...
- Page 2 On sole responsibility we declare that this product is in conformity with the following standards and standard documents: EN 50 144, EN 55014, EN 61 000, IEC 60 745 According to the regulations 2006/95/EC, 89/336/EC, 98/37/EC Model: BLASTRAC BHG-1800 Nieuwegein 02-07-2012...
-
Page 3: Important Instructions
Floor and surface grinder BHG-1800 Important instructions Important instructions and warning notices are allegorized on the machine by means of symbols: Warning of general danger Warning of dangerous voltage Warning of hot surface Danger of being crushed ... -
Page 4: Technical Specifications
Technical Specifications Floor and surface grinder BHG-1800 Interference suppression according to: EN 55014 and EN 61000 Electrical overload protection with LED Thermal overload protection Nominal voltage: 230 V Power drain: 1800 W Rated current: Frequency: 50-60 Hz Load speed: 10.000 rpm Max. -
Page 5: Safety Instructions
Safety instructions Safe work with the machine is only possible if you read this operating instruction and the safety instructions completely and follow the instructions contained strictly. Additionally, the general safety instructions of the booklet supplied with the tool must be observed. Prior to the first use, the user should absolve a practical training. -
Page 6: Electrical Connection
Power tools have to be inspected by a specialist in regular intervals Never carry the machine at its cable Do not touch rotating parts Persons under 6 years of age are not allowed to use the tool ... -
Page 7: Overload Protection
(physical hazard). Overload protection To protect the user and the machine, the BHG-1800 is equipped with an electronic overload protection: To warn the user against an overload of the machine due to too high grinding pressure, a LED is attached to the motor housing. -
Page 8: Dust Extraction
Designed to remove elastic materials Dust extraction Dust which occurs during your work is hazardous to health. That is why the BHG-1800 must be used with a vacuum cleaner, and a dust mask has to be worn. The suitable Wet/Dry vacuum cleaner BDC-1112 is available as accessory. -
Page 9: Care And Maintenance
Care and maintenance Repairs may be executed only by appropriately qualified and experienced personnel. After every repair the machine has to be inspected by an electric specialist. Due to its design, the power tool needs a minimum of care and maintenance. The following works have to be carried out or rather the component parts have to be inspected: The power tool as well as the ventilation slots always have to be clean. - Page 10 Headquarter Blastrac Poland Blastrac Italy Blastrac The Netherlands Golina, Dworcowa 47a S.S. 10 Padana Inferiore, 41 Utrechthaven 12 PL – 63-200 Jarocin IT – 29012 Caorso (PC) NL – 3433 PN Nieuwegein Tel – 0048 627 40 41 50 Tel – 0039 0523 81 42 41 Tel –...