The patented drive system makes sure that this machine is very easy to handle. The machine is simple to dismantle for ease of transportation. Application The BMG-720PRO can be used on almost any floor to plane, to make ready for coatings, or to remove coatings or glue residues. Steer handle...
Operating manual BMG-720PRO 5/12 Accessories There are several types of wings that may be used on this machine. BG707301 Wing red box 9 pieces 18/20 BG707302 Wing red box 9 pieces 30/40 BG707303 Wing red box 9 pieces 60/80 BG707304...
Operating manual BMG-720PRO 6/12 3. Safety Before operating the machine, the personnel who are going to use it must be familiar with the safety instructions given in this manual. Keep this manual near to the machine, so that it may be consulted.
Operating manual BMG-720PRO 7/12 The following sticker is placed on the machine. Meanings of these symbols are: Ear protection is obligatory Safety glasses with lateral protection are obligatory. CE-mark on this machine Safety shoes obligatory. Consult the manual before operating the machine Personnel must tie back long hair and not wear loose clothing or jewellery including rings.
Operating manual BMG-720PRO 8/12 4. Initial operations Before using the machine it is important to inspect the machine. It is not permitted to use the machine if the machine safety is not according the checkpoints below. Checkpoints of electrical safety Use only extension cables for extending the main cable that are sized and marked in accordance with the overall power consumption of the machine.
Operating manual BMG-720PRO 9/12 5. Operating During operating the BMG-720PRO, the following additional safety instructions must be followed closely. Switch on the machine Turn on the dust collector before switching on the machine and connect the dust hose to the machine.
Protect the electrical motor from moisture, heat, dust and shocks. All repair work must to be done by qualified Blastrac personnel, this to guarantee a safe and reliable machine. Any guarantee on the machine is automatically void when:...
1350 mm Weight 350 kg Noise level 87dB(A) Dust hose connection 75 mm Ø Suitable filter unit Contact Blastrac BV We will assist you with a good advice Design and specifications are subject to change without notice by Blastrac BV info@blastrac.eu...