1. Manuals
  2. Brands
  3. Blastrac Manuals
  4. Grinder
  5. BMG580
  6. Operating manual

Blastrac BMG580 Operating Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Operating Manual
BMG580

Advertisement

Table of Contents
loading

Related Manuals for Blastrac BMG580

Summary of Contents for Blastrac BMG580

  • Page 1 Operating Manual BMG580...
  • Page 3 Blastrac BV Utrechthaven 12 3433 PN Nieuwegein THE NETHERLANDS T +31(0)30 - 601 88 66 F +31(0)30 - 601 83 33 E info@blastrac.nl I www.blastrac.com Technical data Safety instructions Nieuwegein General Transport Initial operation Operation Maintenance Electrical systems Fault diagnosis...
  • Page 5 BMG580 Operating Manual Technical Data Contents Chapter 1 1.1 Rating 1.2 Unit specifications 1.3 Operative range and correct usage 1.4 Stand-by power supply 1.5 Machine type designation...

  • Page 6: Unit Specifications

    Operation Manual BMG580 Technical Data 1.1 Rating Unit / Designation: Blastrac Grinding machine Machine type: BMG 580 Manufacturer: Blastrac BV Utrechthaven 12 3433 PN Nieuwegein THE NETHERLANDS T +31(0)30 - 601 88 66 F +31(0)30 - 601 83 33 E info@blastrac.nl I www.blastrac.com...

  • Page 7: Operative Range And Correct Usage

    BMG580 Operating Manual Technical Data Dimensions: BMG-580 Length 950 mm Width 580 mm Height 1250 mm Weight 280 kg 1.3 Operative range and correct usage The grinding machine BMG-580 is exclusively designed to process horizontal surfaces. The machine must not be used for other purposes. The manufacturer will not be liable for damage resulting from incorrect usage.

  • Page 8: Machine Type Designation

    Operation Manual BMG580 Technical Data 1.5 Machine type designation...

  • Page 9: Table Of Contents

    BMG580 Operating Manual Safety Advice Contents Chapter 2 2.1 Warnings and symbols 2.2 Organisational measures 2.3 Personnel selection and qualification 2.4 Safety precautions applicable to some operating sequences 2.5 Special work within the scope of use of the equipment and maintenance activities as well as repairs during operation 2.6 Definition of the Safety off position...

  • Page 10: Warnings And Symbols

    Operating Manual BMG580 Safety Advice 2.1 Warnings and symbols The following denominations and symbols are used in the Operating Instructions to highlight areas of particular importance: Symbol of operational safety. In these Operating Instructions this symbol will be shown next to all safety precautions that are to be taken in order to ensure prevention to life and injury.
  • Page 11 BMG580 Operating Manual Safety Advice Warning against dangerous voltages. Indications relating to protective devices in electrical appliances. Indications where consultation with manufacturer is required. Instructions relating to periodical checks. Reference to important instructions contained in the Operating Instructions.

  • Page 12: Organisational Measures

    Operating Manual BMG580 Safety Advice 2.2 Organisational measures The Operating Instructions are to be kept near the location where the machine is being operated, and must be within reach at all times! In addition to these Operating Instructions general and legal...

  • Page 13: Personnel Selection And Qualification

    BMG580 Operating Manual Safety Advice If safety-critical changes occur to the machine or its working method, the machine must be shut down immediately! The cause of the fault must be established, and rectified. Changes, add-ons or conversions to the machine which might impair...
  • Page 14 Operating Manual BMG580 Safety Advice Define responsibilities of the machine operator, with regard to traffic safety regulations, and inform him not to take instructions from third parties who may not be complying with the local safety requirements! Personnel who are being trained to operate equipment, may only use...

  • Page 15: Special Work Within The Scope Of Use Of The Equipment And

    BMG580 Operating Manual Safety Advice Faults must be immediately rectified! Carry out the switch on, and switch off, operations in accordance with the operation manual! Before switching on the machine make sure that no-one can be endangered when the machine starts up!
  • Page 16 Operating Manual BMG580 Safety Advice The operator must to be given information about maintenance and work procedures, before starting the cleaning process! Procedures that are related to normal operation. Methods of tools adjustment on the machine, and its safety devices, all “ON and OFF”...

  • Page 17: Definition Of The Safety Off Position

    BMG580 Operating Manual Safety Advice 2.6 Definition of the Safety off position Definition: The machine is in a safe condition where it cannot be of any hazard. Putting the equipment in the Safety off position involves: Switch off the machine.

  • Page 18: Electrical Engineering Regulations

    Operating Manual BMG580 Safety Advice 2.8 Electrical engineering regulations Work on electrical equipment, may only be undertaken by a skilled electrician or by trained persons under the supervision of a skilled electrician, as well as in accordance with the local electrical engineering regulations.
  • Page 19 BMG580 Operating Manual General Contents Chapter 3 3.1 Range of application 3.2 Scope of supply 3.3 Description of the machine 3.4 Operating elements 3.5 Electric components 3.6 Upper part 3.7 Lower part 3.8 Tensioner upper belt 3.9 Tensioner lower belt 3.10 Pulley...

  • Page 20: Range Of Application

    Operating Manual BMG580 General 3.1 Range of application Typical range of application of the BMG-580 are for example: • To remove undulated concrete surfaces • To prepare the surface for coatings • To polish the surface • To remove coating defects •...

  • Page 21: Description Of The Machine

    Cover housing Tensioner, lower belt Safety switch The Blastrac-Grinding machine BMG 580 can process an output width of 580 mm, and gives excellent performance due to its high economic efficiency and easy handling. The machine is capable to levelling uneven and undulating floors, this process is suitable for an optimisation of surfaces prior to blast cleaning.

  • Page 22: Operating Elements

    Operating Manual BMG580 General 3.4 Operating elements Handgrip and Operating lever Fig. 3.2 Before Switching on the BMG-580, the front part of the grindingmachine must be lifted by pushing the handgrip (1) down to floor level till the machine is approximately 10cm from the ground.
  • Page 23 BMG580 Operating Manual General ON Switch Switching the "ON" button to the left or right the driving motor will turn. Ensure that the machine work head is lifted before switching on. Emergency shutdown switch Red mushroom-shaped press switch onto a yellow background.

  • Page 24: Upper Part

    Operating Manual BMG580 General 3.6 Upper part The upper part of the BMG 580 is where the drive system for the machine is located, rotational drive is given through a speed reduction drive belt, and pulley system, which also gives contra rotation to the workhead, and drive to the centre pulley.

  • Page 25: Lower Part

    BMG580 Operating Manual General 3.7 Lower part The lower part of the BMG 580 is where the drive pulleys and the diamond tool holders are fitted. On the driving pulley there is a coupling which is driven by the electric motor. Between the driving...

  • Page 26: Tensioner Upper Belt

    Operating Manual BMG580 General 3.8 Tensioner upper belt The upper belt tensioner keeps the upper belt tight. By taking off, the cover of the upper part, the tensioner can be accessed. Fig. 3.6 Axle Countersunk head screw Retaining ring Washer...

  • Page 27: Tensioner Lower Belt

    BMG580 Operating Manual General 3.9 Tensioner lower belt The lower belt tensioner keeps the lower belt tight. By taking off one of the two inspection hole covers at the bottom of the lower plate the tensioner can be accessed. Fig. 3.7...
  • Page 28 Operating Manual BMG580 General 3.10 Pulley There are three pulleys in the machine. Under these pulleys the diamond discs are fixed. The pulley is driven by the driving pulley through a belt. The pulley is fixed on the lower housing with screws.

  • Page 29: Centre Pulley

    BMG580 Operating Manual General 3.11 Centre pulley The centre pulley will slow down the speed of the lower housing. The six head cap screws connect the pulley with the lower housing. Fig. 3.9 Sprocket Retaining ring Pulley Retaining ring Bearing...

  • Page 30: Contra Pulley

    Operating Manual BMG580 General 3.12 Contra pulley The contra pulley gives a reduction of speed to the lower housing. The belt pulley is driven by a belt from the motor pulley. Fig. 3.10 Contra axle Ring Retaining ring Flange Washer...

  • Page 31: Driving Pulley

    BMG580 Operating Manual General 3.13 Driving pulley On the driving pulley shaft there is a coupling which is driven by the electric motor. The driving pulley drives the three pulleys with a belt. The pulley I fixed on the lower housing with screws.

  • Page 32: Diamond Tipped Cutting Tool Holder

    Operating Manual BMG580 General 3.14 Diamond tipped cutting tool holder The diamond tool holder is connected under the pulley by three bolts. There are 3 soft buffers so the energy from the diamond disc will be softened. There are three magnets to attract any iron particles. The centering stars are in place to ensure that the diamond disc cutting tools will pass each other with working clearance.
  • Page 33 BMG580 Operating Manual General 3.15 Diamond discs There are three types of discs that can be put under the diamond holders. The three types are: Diamond tools Scrapers Holders Diamond tools The diamond tools are designed for use on concrete floors. With these tools in use, the floor can be processed to achieve a smooth, and or polished surface finish.
  • Page 34 Operating Manual BMG580 General Tool scheme COLOR BOND GRIT SIZE APPLICATIONS Orange Very hard 16/20 , 30/40 Concrete, quartz floors Green Very hard 16/20 , 20/25 , 30/40 Concrete, bitumen-terrazzo pump , 80/100 , 180/200 screed Black Hard 16/20 , 20/25 , 30/40...

  • Page 35: Care And Maintenance

    BMG580 Operating Manual General 3.16 Care and maintenance Special attendance and regular maintenance of the machine are imperative for functioning and safety. Pay attention to unusual noises or strong vibrations. Check for the cause of every big change. Call a technician if you have doubts about the cause or when a repair without a technician seems not possible without damages.
  • Page 36 Operating Manual BMG580 General Notes...
  • Page 37 BMG580 Operating Manual Transport Contents Chapter 4 4.1 Unit specifications 4.2 Manual mode of moving the machine 4.3 Transport with cranes or lifts 4.4 Transport of the machine with vehicle 4.5 Operation of the machine while grinding...
  • Page 38 Operating Manual BMG580 Transport 4.1 Unit specifications Model variant BMG 580 Dimensions in mm 950 x 580 x 1250 Weight 280 kg 4.2 Manual mode of moving the machine To move the machine press down the handgrips (1) see fig.4.1 of the machine until the front part rises approximately 10 cm from the ground.
  • Page 39 BMG580 Operating Manual Transport Fig. 4.1 4.3 Transport with cranes or lifts If the machine is to be transported by the means of a crane or a fork lift truck, make sure that the lifting means is of sufficient capacity to lift the weight of the machine, this gross weight is shown in chapter 4.1...
  • Page 40 Operating Manual BMG580 Transport 4.4 Transport of the machine with vehicle When transporting the machine in a vehicle drive in such a manner that damage due to the effects of the use of force or incorrect loading and unloading is avoided. Secure the machine with a tightening load strap over the lower frame (3).
  • Page 41 BMG580 Operating Manual Initial operation Contents Chapter 5 5.1 Preparation for initial operation 5.2 Initial operation...
  • Page 42 Operating Manual BMG580 Initial operation 5.1 Preparation for initial operation Before start-up the operating personnel must be familiar with the safety regulations given in this manual. Put the grinding machine and the filter unit on to the surface to be processed.
  • Page 43 BMG580 Operating Manual Initial operation 5.2 Initial operation Fig. 5.1 The start up the machine by taking actions in the following sequence: Switching on the grinding machine Connect the machine to the electrical inlet with an extension cable (CEE 16 Amp) (1).
  • Page 44 Operating Manual BMG580 Initial operation Notes...
  • Page 45 BMG580 Operating Manual Operation Contents Chapter 6 6.1 Operation 6.2 Switching-off the machine 6.3 Trouble Shooting 6.4 Safety shutdown 6.5 Restarting after a fault 6.6 Proceedings- prior and after stationary period...
  • Page 46 A regular inspection is necessary to prevent downtimes of your grindingmachine. See chapter 7 "Maintenance". Pay attention to following aspects during operation of the Blastrac Grinding machine BMG580 Before beginning the grinding work, check daily for regular tightness of all fasteners, especially those of the driving and handling devices.
  • Page 47 BMG580 Operating Manual Operation The normal start up of the Blastrac grindingmachine BMG580 in the daily operation does not differ from the described process in chapter 5.2 "Initial operation". If there are doubts how to start up the machine, read chapter 5.1 and 5.2 of this operating manual.
  • Page 48 Operating Manual BMG580 Operation 6.3 Trouble shutdown In case of emergency or operating trouble, like vibrations or strong noises, switch the machine off immediately by hitting on the OFF- Emergency switch (6). 6.4 Safety shutdown The machine has to be into its “Safety off position” before starting repair works.
  • Page 49 Operation 6.6 Proceedings- prior and after stationary period Before a long stand still period If the Blastrac grindingmachine will be out of action during a long period observe following aspects: Clean the machine and cover it with a plastic foil.
  • Page 50 Operating Manual BMG580 Operation Notes...
  • Page 51 BMG580 Operating Manual Maintenance Contents Chapter 7 7.1 Recommendations 7.2 Maintenance and inspection list 7.3 Repairing 7.4 Grinding disc replacement / assembly 7.5 Upper part 7.6 Lower part 7.7 Pulley maintenance 7.8 Other maintenance 7.9 Spare parts on stock 7.10 Influences on the grinding pattern...
  • Page 52 Operating Manual BMG580 Maintenance 7.1 Recommendations Prior to any repair works on the machine and its drives, secure the machine against unintentional switching-on. Put the machine to its safety off position. Chapter 2.6 Failures, due to inadequate or incorrect maintenance may generate very high repair costs and long stand still periods of the machine.
  • Page 53 BMG580 Operating Manual Maintenance 7.2 Maintenance and inspection list Operating hours/ Inspection points, and maintenance time period instructions 12 h after repairing Check all accessible screw connections for tightness. Daily and prior to Check all safety devices are working correctly starting work Check the power supply cable for damages.
  • Page 54 As previously mentioned in Chapter 5 “Initial operation” we recommend to execute the first repair works on the machine by having support of Blastrac personnel, by taking this advice, maintenance personnel gets the opportunity to be trained by an expert on the machine.
  • Page 55 BMG580 Operating Manual Maintenance 7.4 Grinding disc replacement / assembly Prior to any repair works on the machine and its drives, secure the machine against unintentional switching-on. Put the machine to its safety off position. Chapter 2.6 Disassembly: Make sure that the power supply is disconnect from the electrical inlet (1).
  • Page 56 Operating Manual BMG580 Maintenance 7.5 Upper part Fig. 7.2 Disassembly: • Unscrew the bolts (1) on the topside, to enable the protection cover (2) to be removed. • Disassemble the upper tensioner (3) and the bolts (4) to enable the motor (5) to be removed.
  • Page 57 BMG580 Operating Manual Maintenance 7.6 Lower part Fig. 7.3 Disassembly: • Disassemble the diamond tool holders (1) and take off the v- seal (2) • Unscrew the bolts (3) from the underside, remove the rings (4), and the lower plate (5) •...
  • Page 58 Operating Manual BMG580 Maintenance 7.7 Pulley Prior to any repair works being carried out on the machine or its drives, secure the machine against unintentional switching-on. See chapter 2.6. Fig. 7.4 Disassembly: • Take off the retaining ring (1). • Remove the bearing housing (5) •...
  • Page 59 BMG580 Operating Manual Maintenance 7.8 Other maintenance's Check the brush seals for wear, and replace them at the time when they no longer provide a good seal against dust emissions from the machine, by this action damage to the surrounding workspace is avoided, and consequently saves additional charges from the job client.
  • Page 60 Operating Manual BMG580 Maintenance 7.9 Spare parts on stock Blastrac recommend, that having the following spare parts on stock will avoid long down times, awaiting spare parts. Part No. Description Qty. BG11806 Buffer soft BG11811 Centring star BG11924 Driving belt upper...
  • Page 61 BMG580 Operating Manual Electrics Contents Chapter 8 8.1 Directions for electrical engineering 8.2 Electric circuits diagrams / wiring 440V 8.3 Electric circuits diagrams / wiring 220V...
  • Page 62 Order the electric items with reference to the circuit diagrams in chapter 8.1 or call a Blastrac service centre. Observe the regulations of the VBG 4 and also of the VDE0701. (Measurement after maintenance and repair works).
  • Page 63 BMG580 Operating Manual Electrics 8.2 Electric circuits diagram / wiring 440V...
  • Page 64 Operating Manual BMG580 Electrics 8.2 Electric circuits diagram / wiring 220V...
  • Page 65 BMG580 Operating Manual Fault diagnosis Contents Chapter 9 9.1 Fault diagnosis- grinding machine 9.2 Fault diagnosis electrical system...
  • Page 66 Operating Manual BMG580 Fault diagnosis 9.1 Fault diagnosis – grinding machine Prior to any repair works on the machine or its drives the machine must be secured against unintentional switching-on. Put the machine to its Safety off position. Fault Possible cause...
  • Page 67 BMG580 Operating Manual Fault diagnosis 9.2 Fault diagnosis electrical-system Work on electrical equipment or operating materials may only be undertaken by a skilled electrician or by trained persons under the guidance and supervision of a skilled electrician as well as in accordance with the electrical engineering regulations.
  • Page 68 Operating Manual BMG580 Fault diagnosis Notes...
  • Page 69 BMG580 Operating Manual Spare Parts Contents Chapter 10 10.1 Spares Parts List BMG580 10.2 Diamond discs 10.3 Marbles 10.4 Dots 10.5 Wings...
  • Page 70 Operating Manual BMG580 Spare Parts Fig. 10.1...
  • Page 71 BMG580 Operating Manual Spare Parts 015 - FRAME ITEM PART-NO. DESCRIPTION QTY. BG005829 FRAME FOR POWERBOX BG005841 STEER BMG-580 BG005828 LOWER FRAME M12 WASHER HEXAGON HEAD BOLT M12X40 6 BG11765 BOLT FOR WHEEL BG11755 WHEEL BG11843 BUSH M12 HEXAGON NUT...
  • Page 72 Operating Manual BMG580 Spare Parts Fig. 10.2...
  • Page 73 BMG580 Operating Manual Spare Parts 020-1 - UPPER PART ITEM PART-NO. DESCRIPTION QTY. BG005847 PROTECTION CAP HEXAGON HEAD BOLT M8X20 M8 WASHER HEXAGON HEAD BOLT M14X40 4 M14 WASHER BG11961 MOTOR 7,5 KW 3x220V BG11960 MOTOR 7,5 KW 3X400V HEXAGON SOCKET HEAD CAP...
  • Page 74 Operating Manual BMG580 Spare Parts Fig. 10.3...
  • Page 75 BMG580 Operating Manual Spare Parts 020-2 - LOWER PART ITEM PART-NO. DESCRIPTION QTY. HEXAGON SOCKET COUNTER- SUNK HEAD SCREW M6X50 BG005814 RING HEXAGON HEAD BOLT M8X25 M8 WASHER BG005826 RING BG005850 INSPECTION COVER BG11797 V-SEAL BG11849 V-SEAL HEXAGON SOCKET HEAD CAP...
  • Page 76 Operating Manual BMG580 Spare Parts Fig. 10.4...
  • Page 77 BMG580 Operating Manual Spare Parts 025 – TENSIONER UPPER BELT ITEM PART-NO. DESCRIPTION QTY. BG005830 AXLE RETAINING RING 20, DIN 471 BG11911 BEARING BG005831 TENSION PLATE HEXAGON SOCKET COUNTER- SUNK HEAD SCREW M10X30 M10 WASHER HEXAGON SOCKET HEAD CAP SCREW M10X25...
  • Page 78 Operating Manual BMG580 Spare Parts Fig. 10.5...

  • Page 79: Hexagon Socket Counter

    BMG580 Operating Manual Spare Parts 030 – TENSIONER LOWER BELT ITEM PART-NO. DESCRIPTION QTY. BG005837 AXLE TENSIONER BG005836 PULLEY BG11792 BEARING RETAINING RING 15, DIN 471 RETAINING RING 35, DIN 472 BG005832 HOLDER BG005833 TENSIONER HEXAGON HEAD BOLT M8X50 M8 HEXAGON NUT...
  • Page 80 Operating Manual BMG580 Spare Parts Fig. 10.6...
  • Page 81 BMG580 Operating Manual Spare Parts 035 – PULLEY ITEM PART-NO. DESCRIPTION QTY. BG005816 AXLE PULLEY BG11817 BEARING BG005817 BEARING HOUSE RETAINING RING 30, DIN 471 RETAINING RING 62, DIN 472 KEY 8X30, DIN 6885A BG005819 PULLEY BG11819 TAPER BUSH...
  • Page 82 Operating Manual BMG580 Spare Parts Fig. 10.7...

  • Page 83: Hexagon Socket Head Cap

    BMG580 Operating Manual Spare Parts 040 – CENTRE PULLEY ITEM PART-NO. DESCRIPTION QTY. BG005812 SPROCKET BG005806 PULLEY BG11823 BEARING RETAINING RING 50, DIN 471 RETAINING RING 90, DIN 472 HEXAGON SOCKET HEAD CAP SCREW M8X100...
  • Page 84 Operating Manual BMG580 Spare Parts Fig. 10.8...

  • Page 85: Hexagon Head Bolt M8X20

    BMG580 Operating Manual Spare Parts 045 – CONTRA PULLEY ITEM PART-NO. DESCRIPTION QTY. BG005801 AXLE RETAINING RING 52, DIN 472 BG11881 BEARING RETAINING RING 25, DIN 471 BG005805 PULLEY BG11927 TAPER BUSH KEY 8X20, DIN 6885A BG005804 FLANGE BG005803 BELT PULLEY...
  • Page 86 Operating Manual BMG580 Spare Parts Fig. 10.9...
  • Page 87 BMG580 Operating Manual Spare Parts 050 – DRIVING PULLEY ITEM PART-NO. DESCRIPTION QTY. BG005818 AXLE RETAINING RING 30, DIN 471 BG11800 BEARING RETAINING RIN 63, DIN 472 BG005821 BEARING HOUSE BG005815 BEARING HOUSE KEY 8X35, DIN 6885A BG11815 TAPER BUSH...
  • Page 88 Operating Manual BMG580 Spare Parts Fig. 10.10...
  • Page 89 BMG580 Operating Manual Spare Parts 055 – DIAMOND HOLDER ITEM PART-NO. DESCRIPTION QTY. BG11809 TOOL HOLDER (COMPLETE) BG11811 CENTRING STAR HEXAGON SOCKET COUNTER- SUNK SCREW M6X10 BG11808 MAGNET HOLDER BG11807 MAGNET BG11806 BUFFER SOFT BG11805 BUFFER PLATE M8 WASHER HEXAGON HEAD BOLT M8X25...
  • Page 90 Operating Manual BMG580 Spare Parts...
  • Page 91 BMG580 Operating Manual Spare Parts ELECTRO BOX - 230V ITEM PART-NO. DESCRIPTION QTY. BG001508 HOUR COUNTER BG001500 EMERGENCY STOP BG001506 L/R SWITCH BG001504 START BUTTON BG006091 MOTOR PROTECTION SWITCH 1 BG006055 CONTACTOR BG006056 TIMER SWITCH BG001507 POWER OUTLET MOTOR...
  • Page 92 Operating Manual BMG580 Spare Parts...
  • Page 93 BMG580 Operating Manual Spare Parts ELECTRO BOX - 440V ITEM PART-NO. DESCRIPTION QTY. BG001505 HOUR COUNTER BG001500 EMERGENCY STOP BG001506 L/R SWITCH BG001504 START BUTTON BG006087 MOTOR PROTECTION SWITCH 1 BG006054 CONTACTOR BG006086 TIMER SWITCH BG001507 POWER OUTLET MOTOR BG006085...
  • Page 94 Operating Manual BMG580 Spare Parts 10.2 Diamond discs PART-NO. DESCRIPTION BG200111 Diamond disc orange C7 BG200112 Diamond disc black C4 Ø185 BG200113 Diamond disc red C1 Ø185 BG200114 Diamond disc silver Ø185 BG200115 Diamond disc yellow Ø185 BG200116 Diamond disc blue...
  • Page 95 BMG580 Operating Manual Spare Parts BG200508 Ø185mm Res.marble wht.soft1500 BG200509 Ø185mm Res.marble blue soft3000 BG200700 Ø185mm Resin granite green 60 BG200701 Ø185mm Resin granite black 120 BG200702 Ø185mm Resin granite red 220 BG200703 Ø185mm Resin granite yell.400 BG200704 Ø185mm Resin granite orange 600 BG200705 Ø185mm Resin granite white 800...
  • Page 96 Operating Manual BMG580 Spare Parts 10.3 Marbles PART-NO. DESCRIPTION BG200900 RESINDOT GRANITE GREEN 60 BG200901 RESINDOT GRANITE BLACK #120 BG200902 RESINDOT GRANITE RED #200 BG200903 RESINDOT GRANITE YELLOW 400 BG200904 RESINDOT GRANITE ORANGE 600 BG200905 RESINDOT GRANITE WHITE 800 BG200906...
  • Page 97 BMG580 Operating Manual Spare Parts 10.4 Dots PART-NO. DESCRIPTION BG200982 DRY POLISH DOT BLACK # 120 BG200983 DRY POLISH DOT BLUE #220 BG200984 DRY POLISH DOT RED # 400 BG200985 DRY POLISH DOT WHITE # 800 BG200986 DRY POLISH DOT YELLOW # 1500...
  • Page 98 Operating Manual BMG580 Spare Parts 10.5 Wings CP WINGS HF WINGS (CA WINGS) PART-NO. DESCRIPTION BG500500 WING CA1 BG500502 HTC WINGS C1 GREY BG500503 HTC WINGS C2 ORANGE BG500507 WING CP2 BG500508 WING CP3 BG500509 WING CP4 BG500512 WING CP0...

Table of Contents