Operating; Switch On The Machine; Switch Off The Machine; Operating During Grinding - Blastrac BMG-435WD Operating Manual

During operating the BMG-435WD, the following additional safety instructions must be followed closely.

Switch on the machine

Turn on the dust collector before switching on the machine and connect the dust hose to the machine.

Connect the power supply to the machine (1)

Stand behind the machine.

Push down the handle of the machine (2) so that the machine is off the ground.
Push the green button (3) on the electrical box.

Check the direction of rotation of the 400 volt version. The machine must turn counter clockwise. (the

fan of the motor is turning clockwise if the motor turns counter clockwise)
If the motor turns the wrong direction, turn the switch in the electrical inlet (1) and restart the

machine.
Let down the machine till the diamond wings hit the floor

Start grinding


Switch off the machine

Push the red button (4) on the electrical box

Wait until the machine stops rotating before laying down

the machine on the handle
Pull out the power supply

Shut down the dust collector.


Operating during grinding

This machine will always have an even grinding result because of the planetary system.
However it is advised to keep the machine constantly in movement for an optimum grinding result.

5. Operating

8