Omniswitch 6800-48 - Alcatel OmniSwitch 6800 Series Hardware User's Manual

OmniSwitch 6800 Series Chassis and Hardware Components

OmniSwitch 6800-48

The OmniSwitch 6800-48 is a stackable edge/workgroup switch offering 48 10/100/1000Base-T ports, as
well as four combo SFP ports for high speed connections.
The front panel of the OS6800-48 chassis contains the following major components:
System status and slot indicator LEDs
•
(48) 10/100/1000Base-T ports
•
(4) Combo SFP slots for 1000Base-X connections
•
Console port (RJ-45)
•
An Optional 10 Gigabit module is also supported (see
Refer to the illustration below for more front panel information. For detailed LED descriptions, refer to
page 2-13. For information on the chassis rear panel, refer to
Status and Slot Indicator LEDs
For detailed information on OS6800-48
status and slot indicator LEDs, refer to
page 2-13.
OmniSwitch 6800-48
TM
Speed 1 3 5 7 9
OK PRI
PWR BPS
FAN TMP
XFP1 XFP2
Speed 2 4 6 8 10
10/100/1000Mbps Ports
The OS6800-48 provides 44 fixed 10/100/1000BaseT
ports (1–44) and 4 fixed 10/100/1000BaseT combo
ports (45–48). These ports are auto-sensing and auto-
MDIX and use RJ-45 connectors.
OmniSwitch 6800 Series Hardware Users Guide
Combo SFP Ports
The OS6800-48 provides four combo SFP slots for 1000Base-X high-speed
connections.
By default, when an SFP is installed in a combo port, it takes over the port
number of the corresponding RJ-45 Ethernet port. In other words, if an SFP
is installed in the slot labeled 45, Ethernet port 45 is no longer available and
cannot be used for 10/100/1000 traffic. This default setting is referred to as
"preferred fiber." Refer to "Configuring Ethernet Ports" in the Network
Configuration Guide for detailed information, including steps for configur-
ing combo port settings.
11 13 15 17 19 21 23
12 14 16 18 20 22 24
OmniSwitch 6800-48 Front Panel
July 2005
page 2-34).
page 2-15.
25 27 29 31 33 35 37
26 28 30 32 34 36 38
Console Port
The OS6800-48 front panel provides one
RJ-45 port for console connections. Con-
sole connections are used by network
administrators for switch management.
This female RJ-45 connector provides a
DTE console connection.
OmniSwitch 6800-48
39 41 43 45 47 LINK/ACT
45 47
45
47
46
40 42 44 46 48 LINK/ACT 48
46 48
Console
page 2-5