Omniswitch 6800-U24 - Alcatel OmniSwitch 6800 Series Hardware User's Manual

OmniSwitch 6800 Series Chassis and Hardware Components

OmniSwitch 6800-U24

The OmniSwitch 6800-U24 is an edge/workgroup switch offering 24 1000Base-X MiniGBIC SFP ports,
as well as four combo 10/100/1000Base-T ports.
The front panel of the OS6800-U24 chassis contains the following major components:
System status and slot indicator LEDs
•
(24) 1000Base-X MiniGBIC SFP ports
•
(4) Combo RJ-45 10/100/1000Base-T ports
•
Console port (RJ-45)
•
An Optional 10 Gigabit module is also supported (see
Note. The OmniSwitch 6800-U24 operates in standalone mode only. It does not support stacking.
Refer to the illustration below for more front panel information. For detailed LED descriptions, refer to
page 2-13. For information on the chassis rear panel, refer to
System Status LEDs
For detailed information on OS6800-
U24 system status and other LEDs,
refer to page 2-13.
OmniSwitch 6800-U24
TM
1 3 5
1 3 5 7
OK
PWR BPS
FAN TMP
XFP1 XFP2
2 4 6 8
2 4 6
1000 Mbps SFP Ports
The OS6800-U24 provides 20 non combo SFP slots
for 1000Base-X MiniGBIC SFP ports (1–20) and 4
combo SFP slots for 1000Base-X MiniGBIC SFP
ports (21–24).
OmniSwitch 6800 Series Hardware Users Guide
Combo RJ-45 10/100/1000 Ports
The OS6800-U24 provides four combo 10/100/1000BaseT ports. These
ports are auto-sensing and auto-MDIX and use RJ-45 connectors.
By default, when an SFP is installed in a combo port, it takes over the port
number of the corresponding RJ-45 Ethernet port. In other words, if an SFP
is installed in the slot labeled 24, Ethernet port 24 is no longer available and
cannot be used for 10/100/1000 Mbps traffic. This default setting is referred
to as "preferred fiber." Refer to "Configuring Ethernet Ports" in the Net-
work Configuration Guide for detailed information, including steps for con-
figuring combo port settings.
7 9 11 13 15
9 11 13 15
10 12 14 16 18
8 10 12 14 16
OmniSwitch 6800-U24 Front Panel
July 2005
page 2-15).
page 2-15.
17 19 21 23
17 19 21 23
20 22 24
18 20 22 24
Console Port
The OS6800-U24 front panel provides
one RJ-45 port for console connections.
Console connections are used by network
administrators for switch management.
This female RJ-45 connector provides a
DTE console connection.
OmniSwitch 6800-U24
CLASS 1 LASER PRODUCT
21 22 23 24
Speed LNK/ACT
Console
page 2-7