Alcatel OmniSwitch 6800 Series Hardware User's Manual page 75

OmniSwitch 6800 Series Chassis and Hardware Components
3
After the rack-mount flanges are secured to the power shelf, mark the holes on the rack where the
power shelf is to be installed.
4 Lift and position the power shelf until the rack-mount flanges are flush with the rack post.
5
Align the holes in the flanges with the rack holes that were marked in step 3.
6 Once the holes are aligned, insert a rack mount screw (not provided) through the bottom hole of each
flange. Tighten both screws until they are secure.
Note. Be sure to install the screws in the bottom hole of each flange, as shown, before proceeding.
7 Once the screws at the bottom of each flange are secure, install the remaining rack mount screws. Be
sure that all screws are securely tightened.
OmniSwitch 6800 Series Hardware Users Guide
Attaching the Power Shelf to the Rack
July 2005
Backup Power Supply Components
page 2-47