Handling Weights - HTC 800 Classic Manual

Usage
Adjust the handle to the desired position and secure it, by inserting the locking pin
again.
Figure 4-1. Handle settings
1. The forward position - used, for instance, for transportation, as the machine takes
up significantly less space.
2. Rear position - used for tipping the machine to make tool replacement easier.
3. Working position - the working height can be adjusted to two positions using the
machine's adjustable handle.
4.3

Handling weights

The machine can be equipped with three weights to make it easy to change the
machine's grinding pressure,
mounted, they provide additional grinding pressure that increases the grinding effect.
When using a tool with a high removal rate, such as T-Rex™, we recommend a low
grinding pressure.
Note!
Too high a grinding pressure combined with an incorrect grinding tool may
cause damage to both the machine and the floor.
12
seeFigure 4-2, page 13. When all three weights are
HTC 800 Classic
1.0