Fitting Grinding Tools - HTC 800 Classic Manual

HTC 800 Classic
4.5.1

Fitting grinding tools

1. Slide the grinding tool diagonally, from above, down into the appropriate guide
slot on the tool holder,
the guide slot.
Figure 4-3. Fitting grinding tools
2. Lock the grinding tool into the tool holder by giving it a few light taps with a
rubber hammer - see
Figure 4-4. Locking grinding tools
1.0
see Figure 4-3, page
Figure 4-4, page 15.
15. Then push the tool fully into
Usage
15