Notes - HTC 800 Classic Manual

Safety
Warning!
Always remove the weights before changing tools, to prevent the machine from
tipping back.
Warning!
There is a risk of crush injuries when handling the weights, as these are heavy.
Therefore, the weights should always be handled with great care.
Warning!
Disconnect the electrical supply, when changing tools or repairing the machine.
Warning!
The machine must only be used and moved on level surfaces. There is a risk of
crushing if the machine starts to roll.
Warning!
Connect the machine to an earth fault breaker.
Warning!
Do not clean the machine using a high-pressure washer. Otherwise moisture
may penetrate electrical elements and damage the machine's drive system.
Warning!
The machine may only be used when the splash guard is fitted.
2.3

Notes

Note!
The machine may only be used to grind and polish natural stone, terrazzo,
concrete, or other materials stated in this manual or that are approved by HTC.
Note!
Only original tools and spare parts from HTC may be used for the machine.
Otherwise neither the CE marking nor the warranty will be valid.
Note!
For the CE marking to be valid, the instructions in this manual must be
followed.
Note!
The machine should be stored in a dry, warm (plus degrees) location when not
in use.
6
HTC 800 Classic
1.0