Automatic Line Access; Converting From Pulse To Tone Dialing - NEC Portrait 308 Feature Handbook

Outside Calls, Placing
To use Line Queuing:

Automatic Line Access

Automatic Line Access lets you access an outgoing line without press-
ing a line key or dialing a two-digit line number. A single-digit code
automatically accesses an outgoing outside line.
To access the first
available outgoing
line using Automatic
Line Access:
To access the first
available line in a
Queue Group using
Automatic Line

Converting from Pulse to Tone Dialing

If your company is in a Dial Pulse area, you may need to change the
dialing mode of your phone to tone (DTMF) after you place your ini-
tial call. This allows you to use dial-up services like electronic bank-
ing or a client's Voice Mail.
54
1.
2. Press
3. Dial Queue Group number (1-6).
If you hear busy tone, the extension can
not use Line Queuing for that group.
4.
1. Press
2. Dial
A line is seized and dial tone comes
over the speaker.
1. Press
2. Dial Queue Group number (1-6).
A line is seized and dial tone comes
over the speaker.
Access:
.
.
.
.