Motorola MC75A User Manual page 48

2 - 16 MC75A Enterprise Digital Assistant User Guide
Scan/Decode Charging/Battery
LED Status LED
LED Indicators
Figure 2-15
LED Indications
Table 2-5
Scan/Decode LED
Solid Green
Solid Red
Blink Red
Off
Charging/Battery Status LED
Slow Blinking Amber
Solid Amber
Fast Blinking Amber
Off
Single Blink Amber (when Power button pressed)
Blinking Amber (when Power button pressed)
Radio Status LED
Slow Blinking Green
Off
NOTE For information about scanning/decoding, see
status and settings, see
Integrator Guide.
Radio Status LED
(MC75A6/8 only)
LED State
Chapter 4, Using the
Indication
Successful decode/capture.
Laser enabled, scanning/imaging in process.
MC75A is going into suspend mode.
Not enabled.
Main battery in MC75A is charging.
Main battery in MC75A is fully charged.
Charging error.
Not charging.
Battery depleted.
Battery over-temperature condition.
WAN radio is on.
WAN radio is off.
Chapter 3, Data Capture. For information about WAN radio
Phone, or refer to the MC75A Enterprise Digital Assistant