Motorola MC75A User Manual page 178

8 - 6 MC75A Enterprise Digital Assistant User Guide
Troubleshooting the MC75A (Continued)
Table 8-1
Problem
MC75A shuts off.
Tapping the window
buttons or icons does
not activate the
corresponding feature.
A message appears
stating that the MC75A
memory is full.
MC75A keeps
powering down to
protect memory
contents.
Cause
MC75A is inactive. The MC75A turns off after a period of inactivity. If the MC75A is
running on battery power, set this period from 1 to 5 minutes, in
one-minute intervals. If the MC75A is running on external power, set
this period to 1, 2, 5, 10, 15, or 30 minutes.
Check the Power window by selecting
icon. Select the
delay before the automatic shutoff feature activates.
Battery is depleted. Recharge or replace the battery.
Battery is not Insert the battery properly. See
inserted properly. 1-4.
Screen is not Re-calibrate the screen. See
calibrated correctly.
The system is not Warm boot the system. See
responding.
Too many files Delete unused memos and records. If necessary, save these
stored on the records on the host computer (or use an SD card for additional
MC75A. memory).
Too many Remove user-installed applications on the MC75A to recover
applications memory. Select
installed on the
Programs
MC75A.
The MC75A's Recharge or replace the battery. Configure the MC75A to conserve
battery is low. power. Refer to
information.
Solution
tab and change the setting for a longer
Advanced
Installing the Main Battery on page
Calibrating the Screen on page
Resetting the MC75A on page
> >
Start Settings System
icon. Select the unused program and tap Remove.
Battery Management on page 1-11
> >
Start Settings Power
1-7.
2-17.
and tap the
Remove
for more