Headset Services - Motorola MC75A User Manual

Send Local Picture Window
Figure 6-29
Navigate to the picture to send to the other device.
4.
Tap Open.
5.
Tap OK to send the picture to the other device and display a confirmation dialog box on the other device to
6.
accept the picture. A Send Picture dialog appears.
Tap Ok.
7.

Headset Services

To connect to a Bluetooth headset:
Ensure the MC75A is connectable (required when automatic re-connect is initiated). See
1.
page 6-34.
Ensure that the Headset Audio Gateway service is enabled on the MC75A (required when automatic
2.
re-connect is initiated). See
Use the Connection Wizard to search for a Bluetooth headset.
3.
Select the device and tap Next.
4.
Select the Headset service name and select Connect. A beep is heard in the headset. Refer to the headset
5.
user manual for instructions on communicating with a Bluetooth device.
NOTE When using a Bluetooth headset with Headset Services, you cannot accept or end a call from the headset.
You must accept or end a call on the MC75A.
Press the call button on the headset to accept the connection. System audio is heard on the Bluetooth
6.
headset.
When a call is received on the MC75A, tap the Accept button on the MC75A to answer the call. If the call
7.
button is pressed, the Bluetooth connection is disconnected.
NOTE Newer Bluetooth headsets are device dependant and remember the last device they connected to. If problems
occur while connecting to the headset, place the headset in discovery mode. Refer to the headset user manual
for more information.
Services Tab on page 6-34 for more information.
Using Bluetooth 6 - 27
Device Info Tab on