Charging The Mc75A Battery - Motorola MC75A User Manual

Hide thumbs Also See for MC75A:
Table of Contents

Advertisement

VCD7X00 Vehicle Cradle
This section describes how to use a VCD7X00 vehicle cradle with the MC75A. For cradle installation and
communication setup procedures refer to the MC75A Integrator Guide.
Once installed in a vehicle, the cradle:
holds the MC75A securely in place
provides power for operating the MC75A
provides a serial port for data communication between an MC75A and an external device (e.g., a printer)
re-charges the battery in the MC75A
re-charges a 3600 mAh or 4800 mAh spare battery.

Charging the MC75A Battery

Insert the MC75A into the vehicle cradle to begin charging. A click indicates that the MC75A button release locking
mechanism is enabled and the MC75A is locked in place.
MC75A Battery Charging
Figure 7-5
Ensure the MC75A is fully inserted in the cradle. Lack of proper insertion may result in property damage
CAUTION
or personal injury. Zebra is not responsible for any loss resulting from the use of the products while
driving.
Release Lever
Accessories
7 - 9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents