Changing The Power Settings; Changing The Backlight Settings; Changing The Keypad Backlight Settings - Motorola MC75A User Manual

Battery Management
Observe the following battery saving tips:
NOTE The MC75A factory default settings for the WWAN and WLAN radios are set to ON.
•
Leave the MC75A connected to AC power at all times when not in use.
•
Set the MC75A to turn off after a short period of non-use.
•
Set the backlight to turn off after a short period of non-use.
•
Turn off all wireless activities when not in use.
•
Power off the MC75A when charging to charge at a faster rate.
•
Set IST to turn the display off or to suspend when the MC75A is placed face down.

Changing the Power Settings

To set the MC75A to turn off after a short period of non-use:
Tap >
1. Start Settings
Select the On battery power: Turn off device if not used for check box and select a value from the
2.
drop-down list.
Select ok.
3.

Changing the Backlight Settings

To change the backlight settings in order to conserve more battery power:
Tap >
1. Start Settings
Select the Disable backlight if device is not used for check box and select a value from the drop-down list.
2.
Select the
3. Brightness
Tap the Disable backlight check box to turn off the display backlight, or use the slider to set a low value for the
4.
backlight.
Select ok.
5.

Changing the Keypad Backlight Settings

To change the keypad backlight settings in order to conserve more battery power:
Tap >
1. Start Settings
Select the
2. On battery power: Disable keylight if device if not used for
drop-down list.
Select the
3. Advanced
Tap the
4. Disable keylight
Select .
5. ok
> tab > icon >
System Power
> tab > icon >
System Backlight
tab.
> tab > icon >
System Keylight
tab.
check box to turn off the keypad backlight.
tab.
Advanced
tab.
Battery Power
tab.
Battery Power
check box and select a value from the
Getting Started 1 - 11