4 - 38 DS3508 Product Reference Guide
Multicode Mode (DS3508-SR / DS3508-HD)
Parameter # F1h, A5h
Enable this parameter to allow multiple bar codes to decode upon one trigger event based on the programmed
multicode expression. The digital scanner reports a successful decode and provides user indication only if it
decodes all bar codes indicated by the multicode expression, otherwise the decode fails. Bar codes are transmitted
in the order defined in the multicode expression. Disable this to operate in normal decode mode.
NOTES
The DS3508-DP and DS3508-ER configurations do not support Multicode Mode.
Enabling Multicode Mode disables
Multicode does not operate in presentation mode.
Do not use Multicode Mode if a trigger is set to Laser Preferred Decoding.
Do not use Multicode Mode if
When using this mode, always orient the digital scanner at the same distance and angle (perpendicular).
*
Disable Multicode Mode
Continuous Bar Code Read
(00h)
Picklist
Mode.
is enabled.
Enable Multicode Mode
(01h)