Special Function 1 Setting The Rinse Temperature - Miele PROFESSIONAL PG 8050I Operating Instructions Manual

Programming special functions
Special function 1
Setting the rinse temperature
If you alter the rinse temperature,
make a note of the new temperature
in the appropriate column of the
"Program Guide".
The rinse temperature factory setting
is listed in the "Program Guide".
Use Special function 1 to change the
rinse temperature from 85 °C to 65 °C.
At a temperature of 85 °C, the drying
fan will turn on when the
temperature reaches 65 °C to
dissipate the steam.
The drying fan will continue to run
for 45 minutes after the program has
finished.
The rinse temperature cannot be
altered in the programs "Glasses"
(G 8050) / "China & Crystal" (PG 8050i)
and "Beer Glasses".
It is not possible to change settings
while a program is running. You will
have to cancel the program. The
"Start/Stop" indicator must be
flashing.
40
Accessing the rinse temperature
programming level
^ Turn the dishwasher off with the
"On/Off" button.
^ Press and hold the "Extra drying"
and "Start/Stop" buttons, at the same
time, turn the dishwasher on with the
"On/Off" button.
The "Wash" indicator will come on and
the "Recharge" indicator will flash.
The set water hardness will then appear
in the display.
^ Press the "Extra drying" button twice.
The programming level is accessed.
The "Spray arm" indicator will come on,
the "Mini" (G 8050) / the "Express"
(PG 8050i) indicator will come on or will
flash and the "Recharge" indicator will
flash.
Special function 1 "Setting the rinse
temperature" is selected and indicated
with two-digit numbers in the display.