Frequently asked questions
With the aid of the following guide, minor problems can be fixed without a service call.
Repairs should only be carried out by a qualified and trained person in
accordance with local and national safety regulations. Unauthorized repairs
could cause personal injury or machine damage.
Technical faults
Issue
The "Start/Stop"
indicator does not flash
after the appliance has
been turned on with the
"On/Off" button.
The dishwasher stops
during a program.
The "Fill/Drain"
indicator lights and
flashes alternately.
56
Possible fault
The door is not properly
closed.
The appliance is not
plugged in.
The fuse is defective or
has tripped.
The fuse is defective or
has tripped.
The water supply is
closed.
The water inlet filter is
blocked.
The Waterproof system
has reacted.
Solution
Close the door firmly.
Insert the plug.
Replace the fuse
(see data plate).
Replace the fuse
(see data plate).
Open the water supply
fully.
Before fixing the problem:
– Press the "Start/Stop"
button for at least one
second.
– Turn the dishwasher
off.
Then:
– Clean the water inlet
filter, see "Cleaning the
water inlet filter".
Call the Miele Service
Department.