Miele PROFESSIONAL PG 8050I Operating Instructions Manual page 57

Issue
The "Fill/Drain"
indicator flashes and
the program stops.
Frequently asked questions
Possible fault
The water supply is
closed.
The water inlet filter is
blocked.
The water pressure at
the intake is lower than
0.3 bar (4 psi).
The triple filter in the
wash cabinet is
clogged.
The drain pump or
non-return valve may be
blocked.
The drain hose is kinked. Remove any kinks in the drain
Solution
Before fixing the problem:
– Press the "Start/Stop" button
for at least one second.
– Restart the program.
Open the water supply fully.
Before fixing the problem:
– Press the "Start/Stop" button
for at least one second.
– Turn the dishwasher off.
Then:
– Clean the water inlet filter,
see "Cleaning the water
inlet filter".
Contact a plumber.
Before fixing the problem:
– Press the "Start/Stop" button
for at least one second.
– Turn the dishwasher off.
Clean the triple filter,
see "Cleaning and Care".
Clean the drain pump and
non-return valve, see
"Cleaning the drain pump and
non-return valve".
hose.
57