Miele PROFESSIONAL PG 8050I Operating Instructions Manual page 6

Safety instructions and warnings
Proper use
~
Repair of the commercial
dishwasher during the warranty period
should be performed only by a
customer service center authorized by
the manufacturer, otherwise any
damage will not be covered by the
warranty.
~
Always exercise care when handling
liquid cleaning agents or additives.
Some of these products contain
corrosive and irritating substances.
NEVER use organic solvents since
there is a risk of explosion.
ALWAYS observe the applicable safety
regulations. Use safety glasses
and gloves. Always follow the
manufacturer's safety
recommendations when using chemical
additives.
~
The water in the wash cabinet is
NOT safe to drink.
~
Avoid inhaling powdered cleaning
agents.
If detergents are swallowed, this can
result in chemical burns to the mouth
and throat or even suffocation.
~
Certain pre-treatments (for example,
that contain detergents), as well as,
certain contaminants and some
dishwashing liquids, can generate
foam. Foam can adversely affect the
cleaning performance.
6
~
The recommendation to use
chemical additives (such as cleaning
agents) does not mean that the washer
manufacturer accepts liability for how
these chemical additives may affect the
wash load.
Note that formulation changes, storage
conditions, etc., not disclosed by the
manufacturer, may alter the cleaning
results obtained.
~
When using cleaning agents and
special-purpose products, comply
strictly with the instructions of the
respective manufacturer. In order to
avoid possible chemical reactions
(such as explosive hydrogen gas
reactions), use cleaning agents only for
the applications intended by the
manufacturer.
~
The commercial dishwasher is
designed only for operation with water
and additive cleaning agents. Organic
solvents must NOT be used in the
appliance, as there is the danger of
explosion and/or damage.
(Note: Although many organic solvents
do not involve a danger of explosion,
they may still cause other problems,
such as the destruction of rubber and
plastics.)
~
For critical applications, where very
high processing-quality requirements
have to be met, it is strongly
recommended that all process-related
factors (cleaning agents, water quality,
etc.) be discussed in advance with
Miele's Application Technology.