Table of Contents
Advertisement
Safety Stop Time / Gauge Mode / Apnea Mode
Setting the incremental depth alarm
With this alarm you can set repetitive depth alarms at given depth increments.
1. Confirm that you wish to change the settings of the incremental depth alarm by pushing
Increment value starts to flash.
2. Scroll value with
3. Confirm the increment with
4. Switch between Up/Down/Both/Off with
5. Confirm the setting with
Setting the dive time interval warning
With this alarm you can set time alarm that repeats on given intervals.
1. Confirm that you wish to change the settings of the dive time interval warning by pushing
Interval value starts to flash.
2. Scroll time value with
3. Confirm the interval time with
4. Switch between on/off with
5. Confirm the setting with
Setting the Surface Interval warning
With this alarm you can set a time for recovery or start time for repetitive dive when training against
given tables.
1. Confirm that you wish to change the settings of the Surface Interval warning by pushing
Time value starts to flash.
2. Scroll time value with
3. Confirm the surface time with
4. Switch between on/off with
5. Confirm the setting with
44
or
.
. Up/Down/Both/Off starts to flash.
.
or
.
. On/off starts to flash.
.
.
or
.
. On/off starts to flash.
.
.
.
.
.
.
Advertisement
Table of Contents
