Table of Contents
Advertisement
2 Gauge mode
In gauge mode ALL audible and visual alarms and attention messages are turned off.
In gauge mode Aladin SPORT will display depth, dive time and max depth. By pressing
scroll from the max depth to the temperature, to the average depth, to the time of day and back to the
max depth. By pressing
does not support the calculation of no-stop time or the supervision of decompression. Supervision of
ppO 2 max and CNS O 2 % will also be switched off. Aladin SPORT will display no information about
microbubble development. The settings for the gas mixture, MOD and microbubble level cannot be set
and the dive planner cannot be selected.
Switching the gauge mode on and off
Gauge mode can be switched on and off at the surface, when there is no desaturation and no-dive in
gauge mode has been made in the last 48 hours.
• Dives in gauge mode are performed at your own risk!
• After diving in gauge mode you must wait for at least 48 hours before using a decompression
computer.
After diving in gauge mode, Aladin SPORT can not be used as dive computer for 48 hours.
Procedure:
1. From the time of day display push
(If Aladin SPORT shows " – – – " the gauge mode cannot be switched "on" or "off". Aladin
SPORT shows " – – – " for 48 hours after a dive in gauge mode and as long as there is remaining
desaturation after a dive in computer mode.)
2. Confirm with
that you wish to activate or deactivate the gauge mode. "Deco", "Gauge" or
"Apnea" starts flashing.
3. By pushing
or
Select: "Gauge".
4. Confirm your settings with
Without confirmation the display will disappear after 3 minutes and your entries will not be accepted.
Safety Stop Time / Gauge Mode / Apnea Mode
! WARNING
you can restart the stopwatch. This generates a bookmark. Gauge mode
! WARNING
or
until the "ALGO" is displayed.
the mode will scroll between: Gauge, Deco (SCUBA diving) or Apnea.
.
you can
39
Advertisement
Table of Contents
