Clock Functions; Using The Accessories - AEG EE3003011 User Manual

To start the automatic heat-up:
1. Turn the knob for the cooking zone
clockwise as far as possible (beyond
the highest heat setting).

6. CLOCK FUNCTIONS

Clock function
You can use Duration
End
want the appliance to activate
and deactivate automatically:
first set the Duration
the End
6.1 Setting the clock functions
1. For Duration and End, set an oven
function and temperature. This is not
necessary for the Minute Minder.
2.
Press the Selection button again and
again until the indicator for the nec-
essary clock function flashes.

7. USING THE ACCESSORIES

WARNING!
Refer to the Safety chapters.
Time of day To show, set, or change the time.
Minute minder To set a countdown time. This function has no effect
on the operation of the oven.
Duration To set the length of an oven operation.
End To set the switch-off time for an oven function.
at the same time if you
.
hr min hr min
2. Immediately set the necessary heat
setting.
3. To deactivate the function, turn the
knob to the off position.
Application
3. Press + or - to set the necessary
and
clock function.
The display shows the indicator for
the clock function you set. When the
set time ends, the indicator flashes
and then
and an acoustic signal sounds for
two minutes.
4. Press a button to stop the signal.
5. Turn the knob for the oven functions
and the knob for the temperature to
the off position.
6.2 Cancelling the clock
functions
1. Push the Selection button again and
again until the necessary function in-
dicator flashes.
2. Push and hold the button -.
After some seconds the clock func-
tion goes out.
ENGLISH
With the Duration and End func-
tions, the appliance deactivates
automatically.
9