Monoprice extrusion i3 13860 User Manual page 8

6. Insert the Printer Base into the Tower Frame and align the screw holes on the frame
with those on the base.
7. Open the accessories box and remove four Hex Screws and the Hex Wrench. Insert
a screw into hole on the frame on the left side and tighten it using the hex wrench.
Repeat the process on the right side.
8. Flip the printer onto its left side, then insert a screw from inside the base and secure
it to the frame using the hex wrench. Flip the printer onto the other side and repeat
the process.
8