Package Contents; Navigating The Menu System - Monoprice maker architect 13861 User Manual

PACKAGE CONTENTS

Please take an inventory of the package contents to ensure you have all the items listed
below. If anything is missing or damaged, please contact Monoprice Customer Service for a
replacement.
1x 3D Printer
1x Single Extruder
1x Spool Holder
1x Filament Guide Tube
1x Spool White PLA Filament (1 kg)

NAVIGATING THE MENU SYSTEM

The printer has five buttons on the front panel, which are used to navigate and modify
entries in the menu system. As can be seen in the image, the buttons consist of four
"arrow" buttons and a middle button, sometimes referred to as the "M" button.
 Use the Up and Down arrow buttons to move the highlight in
the menus.
 Use the Middle (M) button to select the currently highlighted
menu entry.
 Use the Left arrow button to back out to the previous menu.
Throughout this manual you will be asked to navigate the menu system and select specific
menu entries. For example, you may be told to select:
To do this, use the Up and Down arrow buttons to move the highlight to the Utilities entry,
then press the Middle (M) button to open the Utilities menu. Next move the highlight to
the Level Build Plate entry, then press the Middle button to activate it.
1x Bolt & Hex Wrench Kit
1x Power Supply Cable
1x USB Cable
1x 4GB SD Card
1x Quick Installation Guide
Utilities > Level Build Plate
5