Monoprice extrusion i3 13860 User Manual page 16

25. 17. While holding the filament in place with one hand, select Extruder > Extr.
Position. Push gently downward on the filament while turning the knob clockwise.
You will feel the filament being pulled into the extruder. Continue until a few inches
of filament material extrudes out of the nozzle. Carefully clean the extruded
filament material off the plate and nozzle.
26. Insert the included MicroSD card into the slot on the side of the Power Supply, then
select SD Card > Mount Card. Finally, select SD Card > Print File, select one of the
sample 3D model files, then press the knob to start printing.
Congratulations, you have successfully setup your new 3D printer and are printing your
first model!
16