STEP 11 CONNECT WATER SUPPLY
House
Water Supply
a quart of water through tubing into a bucket, then
shut off water.
Copper Tubing:
" nut and ferrule (provided) over both ends
of the copper tubing. Insert tube into the union fitting
on the unit and tighten nut to union.
GE SmartConnect
Tubing:
™
until it is just hand tight.
Note: Make sure excess tubing length does not
interfere with drawer closing or toekick installation.
Installation Instructions
Refrigerator
Water Supply
STEP 12 CONNECT POWER
receptacle.
by opening refrigerator door to see if interior lights
are on.
for the fresh food section and 0°F for the freezer.
adjustments.
STEP 13 START ICEMAKER
operation automatically.
the feeler arm.
16
OFF
ON