Step 14 Start Icemaker; Step 15 Install Toekick; Step 16 Inspect Final Installation - GE PSB42LGRBV Nstallation Instructions

STEP 14 START ICEMAKER

Green Power Light
• Flip the switch to I (ON). The icemaker will begin
operation automatically.
• Make sure nothing interferes with the sweep of the
feeler arm.
• Discard the first full bucket of ice cubes.
• To turn the icemaker off, set the switch to O (OFF).

STEP 15 INSTALL TOEKICK

• Locate the supplied toekick (shipped taped to the top
of the refrigerator). Install with 2 screws provided,
adjust to desired height and tighten screws.
• A custom toekick (not supplied) can be installed to
match or complement the surrounding cabinets. Use
the supplied toekick as a template to cut the shape.
Supplied Toekick
1/4" or Thicker Toekick
Installation Instructions
Power Switch
Feeler Arm
STEP 16 INSPECT FINAL
INSTALLATION
Check door alignment
Stand back from the refrigerator to inspect the final
installation.
• During shipping or the addition of heavy door panels
may have caused the doors to move slightly out of
alignment.
• If necessary, the Fresh Food door may be adjusted
up or down to align with the Freezer door.
• Use a 7/32" wrench to adjust the hinge pin as
shown.
19
Door Out of
Alignment
Bushing
D o o r H i n
C a s e H in g
7/32" Wrench
Raise
g e
e