Step 10A Install Overlay Panels - GE ZIC360NXRH Installation Instructions Manual

STEP 10A INSTALL OVERLAY PANELS

Use Rear Holes
Install door and drawer panels:
from the door handle.
Retain screws.
Custom handles
If you are using custom handles, the handle must be
properly secured to the panel before sliding the panel
into the trim.
handle and hardware.
and REAR screw holes. Discard supplied handle.
Installation Instructions
Use Front Hol
to Secure Hand
to Secure Trim
Right hand models shown. Use the same instructions
for left hand models.
Supplied handle shown in the
overlay panel position.
Replace handle side trim by installing the original screws
in the REAR screw holes.
screw holes.
15