Removing The Head Restraint; Adjusting The Steering Wheel Position - Volkswagen Polo 2015 Owner's Manual

12/29/2015
Removing and fitting head restraints
First read and observe the introductory information and safety warnings
Every seat is fitted with a head restraint. The centre rear head restraint is designed solely for use with the centre rear seat. This head restraint
should therefore not be installed in any of the other positions.

Removing the head restraint

If necessary, unlock the backrests and fold them forwards
Push the head restraint all the way up
Pull the head restraint out while pressing the ①
If necessary, push back the backrest and allow to engage securely.
Fitting the head restraint
If necessary, unlock the backrests and fold them forwards
Position the head restraint correctly over the head restraint guides and then insert into the guides of the corresponding seat backrest.
Press and hold the ① → Fig. 43
If necessary, push back the backrest and allow to engage securely.
Adjust the head restraint so that a correct sitting position can be assumed
WARNING
Driving without head restraints or with incorrectly adjusted head restraints increases the risk of severe or fatal injuries in the event of an
accident or sudden driving or braking manoeuvre.
If a seat is occupied, the head restraint for that seat must be fitted and adjusted correctly.
Head restraints that have been removed should be fitted as soon as possible so that passengers have correct protection.
NOTICE
When removing or fitting head restraints, make sure that they do not hit the roof or other parts of the vehicle. This could damage the headliner
or other parts of the vehicle.

Adjusting the steering wheel position

Bedienungsanleitung < Service & Zubehör < Volkswagen Deutschland
→ Luggage compartment
→ .
→ Fig. 43 or
→ Luggage compartment
or → Fig. 44 button and push down the head restraint.
→
Introduction
.
→ Fig. 44 button.
.
→ Adjusting the head restraints
.
40/136