Sd Card Door - FLIR Scout Operator's Manual

3—Operating Your Scout Camera
3–7

SD Card Door

The SD Card door is located on the
bottom of the camera in front of the
battery compartment. The SD card,
the USB connector, and the Auto-
Standby Enable switch are located
under the door. See "Auto-Standby
Operation" on page 22.
Auto-Standby Enable
switch
SD Card
Lanyard
Note
The Hot Shoe must be removed to access the SD Card door.
To open the SD Card door, grasp the
two edges with your thumb and finger
and pull straight up.
Caution!
Do not stretch or break the rubber
lanyard that keeps the door captive
to the camera when opened.
To close the SD Card door, slide the
lanyard strap back into the camera,
position the door in place, and then
firmly press in the middle of the door
until it is fully seated.
20
.800.561.8187
USB
www.
Scout Operator's Manual
SD Card
door
Grasp SD Card door
edges and pull
information@itm.com
.com
June 2011