Scout Operator's Manual
3–9
Note
The Hot Shoe is not waterproof and should not be used in wet
environments.
The Hot Shoe provides the
connections to power the camera for
continuous operation or charging the
batteries; and for accessing the
analog video output. The Hot Shoe
attaches to the bottom of the camera
and is secured via the tripod mount.
The following steps are
recommended for quick and easy
attachment of the Hot Shoe.
1. With the camera positioned
2. Rotate the attachment wheel
3. To remove the Hot Shoe, simply
431-TS00-00-10, Revision 110
.800.561.8187
The Hot Shoe
bottom-side up, hold the Hot
Shoe in position.
in the clockwise direction until tight.
rotate the attachment wheel in the
counter-clockwise direction until it is
free.
www.
3—Operating Your Scout Camera
Power
Video
information@itm.com
.com
23