FLIR Scout Operator's Manual page 25

Scout Operator's Manual
SD Card Capacity and Type
The TS24 Pro and TS32 Pro model cameras support storing images
and video on standard 1-Gb and 2-Gb SD cards or up to 32-Gb on
SDHC cards.
If an SD card is inserted into a non-Pro model, the SD card will be
ignored unless the camera software detects a valid upgrade file.
In order to store images and video on the SD card, non-Pro model
cameras must be upgraded to a Pro model camera: TS24 Pro,
TS32 Pro, or TS32r Pro.
Installing an SD Card
To install an SD card, insert the card into
the slot and press on the SD card until its
edge is nearly flush with the surface and
release.
To remove an SD card, use this same
motion.
Downloading Stored Files via USB
The TS24 Pro and TS32 Pro camera models also support
downloading stored images and video via the USB port.
With the camera on, plug the USB cable into the USB connector on
the camera and a USB port on your computer.
Allow up to two minutes for the USB connection to be recognized by
the computer's operating system.
431-TS00-00-10, Revision 110
.800.561.8187
www.
3—Operating Your Scout Camera
information@itm.com
.com
21