Expanding Memory - Kyocera FS-7000 User Manual

Expanding Memory

Expanding Memory
Memory Required by the Printer Environment
1- 42
The printer comes standard equipped with 4 MB of main memory. However, more complex pages
can be printed and processing speed increased by expanding the printer's memory. There are two
slots available in the printer for expanding memory. Printer memory can be expanded to up to 68 MB
by installing optional extended memory chips (SIMMs) in these slots.
Note ____________________________________________________________________
The expansion memory should be installed only by a Kyocera authorized dealer or Kyocera certified
technician. Kyocera shall not be liable for damage due to improper installation of the expansion
memory.
It may be necessary to extend memory depending on the operating environment of the printer.
Please refer to the table below for minimum memory requirements in various environments.
Printing Environment
HP LaserJet 5Si (factory setting)
HP LaserJet 5Si, duplex mode = on*
HP LaserJet 5Si, duplex mode = off
Resource protection
HP LaserJet 5Si, duplex mode = on*
Resource protection
*An optional duplex unit (DU-30) is required for duplex printing.
Minimum Memory Required
Resolution: 300 dpi Resolution: 600 dpi
4 MB
4 MB
—
—
4 MB
6 MB
10 MB
14 MB