Form Feed - Kyocera FS-7000 User Manual

Form Feed

Mode Selection
Depending on the software, the message Waiting may be displayed in the message display
when you get to the end of a print job. This occurs when the software does not issue a final form
feed to the printer indicating the end of the print data. If you wait awhile, FormFeed TimeOut
will be displayed and the last page will be printed automatically. Pressing the FORM FEED key
allows you to finish printing immediately.
Check if the message display reads Waiting.
1.
Press the FORM FEED key. The message display will now read Processing and the last
2.
page will print.
Note ____________________________________________________________________
The Waiting display may also appear due to interruptions in printed data while the computer is
processing data. Pressing the FORM FEED key unnecessarily when the message display reads
Waiting will result in a form feed.
The MODE key is used when making various mode settings and selections. For details, see the
section Mode Selection Menu beginning on the next page.
Chapter 2 Operating the Page Printer
2-23