Kyocera FS-7000 User Manual page 170

Correcting a Paper Jam
CAUTION
WARNING
5-18
Correcting Paper Jams
Pull out the paper feed unit and wait a while to allow the fuser unit to cool. Do not touch the
fuser unit as this may result in a burn injury.
Take care not to leave any small pieces of paper in the printer when removing paper jams as
this may result in fire.
Note that data remaining in the printer will be lost if power is turned off while correcting a paper jam.
After checking the location of the paper jam using the table on the previous page, take corrective action
according to the table on the next page. After removing all jammed paper, the printer will automaticaly
resume printing.
Fuser unit