Kyocera FS-7000 User Manual page 112

Memory Cards
2-40
Bring up the menu >Format on the message display.
1.
Press the ENTER key. ? will appear.
2.
Pressing the ENTER key again will cause Processing to appear in the message display
3.
and the memory card will be formatted.
The printer will print memory card formatting information (example below) after initialization is
finished. Use this to check that the memory card has been formatted properly.
Slot number: Slot name for the memory card (only A is supported)
Card size: The overall memory capacity of the card (in units of bytes)
Data size: The amount of data available to the system
Remaining Size: The remaining amount of available memory on the memory card
After this information is printed, the message display will return to Ready.