Putting A Call On Hold; Music On Hold; Dialing A New Call While On A Call - 3Com VCX V7000 Manager's Manual

36 C 3: B
HAPTER ASIC
Putting a Call
on Hold

Music on Hold

Dialing a New Call
While on a Call
T O
ELEPHONE PERATION
It may take a few minutes for your headset to return from the
power-saving mode to the active mode when calls first come in, so your
telephone may not ring until the headset has returned to active mode,
and you may miss a call.
If you plan to not use the headset for a long time, 3Com recommends
that you set the mute and headset buttons on the amplifier to Off and
hang up the handset on your telephone. When you are ready to receive
calls again, set up the headset for receiving calls:
1 Pick up the handset on your telephone and set it on your desk.
2 Put on the headset.
3 On the amplifier, set the headset button to On.
To put a call on hold:
1 Press the Hold button. Or press the Right button corresponding to the
call for the Actions menu, scroll to Hold, and press Select.
2 To return to the call, press the corresponding Left button. Use the scroll
buttons to locate the call if necessary.
If configured by the administrator, callers on hold hear music while they
wait.
The VCX system's WAV file importing capabilities are solely an
accommodation to you and shall not constitute a grant or waiver (or
other limitation or implication) of any rights of the copyright owners in
any audio content, sound recording or underlying musical or literary
composition. Therefore, please be mindful that you are obligated to
comply with all applicable copyright and other intellectual property laws
in both uploading WAV files to the VCX system and your subsequent use
of such WAV files.
You can put a call on hold, dial a new call, and toggle between the two
calls:
1 Press the Hold button. Or press the Right button corresponding to the
call for the Actions menu, scroll to Hold, and press Select.
2 Press an Access button, the New Call button, of the Left button to
choose a new line.