Activating Malicious Call Trace - 3Com VCX V7000 Manager's Manual

Activating
Malicious Call Trace
To activate Do Not Disturb:
1 Open the Features tab, then scroll down the list of features and select
Do Not Disturb.
Your telephone is now in Do Not Disturb mode. The display panel shows
DND.
2 To disable Do Not Disturb mode, repeat step 1. The DND message
disappears from the display panel.
The Malicious Call Trace feature enables you to notify the system if you
receive a harassing or abusive call. The calling party can be from either an
external or internal source.
Malicious Call Trace cannot be invoked when you are on a conference
call.
To activate malicious call tracing during a call, press Feature + 119.
The Display Panel shows
The results of tracing a malicious call include the following actions:
Notification is sent to your network manager.
The log for the call includes a malicious call identifier.
For external malicious calls, the VCX system sends a message to the
authorities configured by your administrator to receive these reports.
Once you use the Malicious Call Trace feature code during a call, you
cannot revoke it.

Activating Malicious Call Trace

for 5 seconds.
malicious call
41