Emergency Phone Number Dialing Service - 3Com VCX V7000 Manager's Manual

Emergency Phone
Number Dialing
Service
Use the up and down scroll buttons to navigate through the hunt group
list. The first line displays the name and number of the hunt group. The
second line displays your current status.
Press Change soft button below the Display Panel to change your
current login status.
Press Exit soft button below the Display Panel to exit from the hunt
group display.
When you change your login status, the Display Panel shows
. If you are logged into multiple phones using the same
Login Enabled
phone number, this message appears on all phone displays. While this
message appears in the Display Panel, press Feature + 972 to display the
hunt group list.
You can also use the VCX User Interface to view the hunt groups you
belong to and your current login status for each group.
If a hunt group member has a remote phone, that remote phone will not
appear in the VCX User Interface Hunt Group Membership list, but it does
appear in the administrator's Hunt Group Membership list.
VCX phones provide the capability to dial an emergency phone number
even when the phone is not logged in to a VCX system. The phone must
be properly configured, connected to an operational VCX system, and the
region must support this service. If the VCX system is not operational, an
emergency call can be routed (optionally) directly through a PSTN media
gateway. Contact your system administrator to determine the appropriate
emergency number for your region.

Emergency Phone Number Dialing Service

81
HuntGroup