Table of Contents
Advertisement
3
OSD -
OSD Information
Preset Label
1
Camera ID_Top
2
Camera ID_Bottom
3
4
Date / Time
5
Image Flip
Address
6
Preset Label
1
- The label stored for specific preset.
- See the section 'ROOT MENU>FUNCTION SETUP>PRESET
SETUP>LABEL'.
Camera ID_Top
2
- If 'CAMERA ID' sets 'TOP', camera ID displayed in this area.
- See the section 'ROOT MENU>DISPLAY SETUP>CAMERA ID'.
Camera ID_Bottom
3
- If 'CAMERA ID' sets 'BOT', camera ID displayed in this area.
- See the section 'ROOT MENU>DISPLAY SETUP>CAMERA ID'.
Date / Time
4
- Shows the current date/time.
- See the section 'ROOT MENU>SYSTEM SETUP>DATE/TIME
SETUP.'
Image Flip
5
- Shows that images are currently reversed by auto flip
function.
- See the section 'ROOM MENU>CAMERA SETUP>IMAGE FLIP'.
6
Address
- The current RS-485 address information.
- See the section 'ROOT MENU>SYSTEM INFORMATION'.
Action Title
7
Followings are possible action titles and their meaning.
Action Title
SET PRESET 123
Means to store preset 123.
PRESET 123
Means it reached preset 123.
PATTERN 1
Means the camera is running pattern 1.
SCN 1/PRESET 123
Means the camera is running scan 1.
RANGE OVER
Means the action received is not within the
range supported.
Means the action received is not defined.
UNDEFINED
PRESET LABEL
CAMERA ID_TOP
CAMERA ID_TOP
CAMERA ID_BOT
CAMERA ID_BOT
23/MAR/2009
24 00 00
359/180/x100/SE
CAM 1
F
Means
17
PATTERN 1
O 1234
I 12345678
Alarm I/O Information
8
- This information shows current state of alarm input and
output.
- The ' I ' means input and 'O' means output.
- If an input is on state it will show the number of input.
If an input is off state, ' - ' will be displayed. In the same way
'O:1 - - -' means output 1 is on and other output is off.
Ex) When point 2 of inputs are on, and output 1 is on, OSD
will show as below.
23/MAR/2009
24 00 00
359/180/x100/SE
CAM 1
Compass Direction
9
- Shows the current compass direction of the camera.
- The direction is shown as N(North), S(South), E(East),
W(West), NE(Northeast), NW(Northwest), SE(Southeast),
SW(Southwest).
- See the section 'ROOT MENU>SYSTEM SETUP>SET NORTH
DIRECTION'.
10
Zoom Magnification
Shows the current zoom magnification.
Tilt Angle in Degree
11
Shows the current tilt(0 ~ 180) angle.
Pan Angle in Degree
12
Shows the current pan(0 ~ 359) angle.
Action Title
7
8
Alarm I/O Information
9
Compass Direction
10
Zoom Magnification
Tilt Angle in Degree
11
Pan Angle in Degree
12
O 1---
I -2------
Advertisement
Table of Contents
