5.2.3 OSD Configuration
Go to Image > OSD interface as shown below.
Set time stamp, d evice name, OSD content and picture overlap here. After
enabling the correspond ing d isplay and entering the content, d rag them to
change their position. Then click the "Save" button to save the settings.
Picture Overlay Settings:
Check "OSD Content1", choose "Picture Overlay" and click "Browse" to select the
overlapping picture. Then click "Upload" to upload the overlapping picture. The
pixel of the image shall not exceed 200*200, or it cannot be uploaded.
5.2.4 Video Mask
Go to Image > Video Mask interface as shown below. A maximum of 4 zones can
be set up.
16