Log Placement - Kingsman IVF36 Operation And Installation Manual

LOG24 Placement
1. Place main log on retainer pins located
on Firebox bottom.
2. Place rear main log onto rear log holder making
sure log is not sitting on rear burner tube.
3. Place crossover log on retainer pins
located on top of rear main log.
4. Front log, position flat surface up to main log.
LOG PLACEMENT FOR LOGF24
WARNING
The positioning of the logs is critical for safe and clean
operation of this heater. Sooting and other problems
can occur if the logs are not properly and firmly
positioned in the heater. Never add additional logs or
embellishments such as pine cones, vermiculite,
volcanic rock or rock wool to the heater.
21