Yealink SIP-T41P Configuration Manual page 56

Yealink IP Phones Configuring Guide
You can set up a conference call with other two parties. It supports up to 3 parties
(including yourself) in a conference call.
To set up a conference call:
1. Place a call to the first party.
2. When the first party answers the call, press the Conf soft key to place a new call.
The active call is placed on hold.
3. Enter the number of the second party and press
4. When the second party answers the call, press the Conf soft key again to join all
parties in the conference.
You can press
To join two calls in a conference:
1. Place two calls using two different accounts on the phone (for example, place the
first call using account 1, and then place the second call using account 2).
2. Press
(for example, select the call on account 1).
3. Press the Conf soft key to join the two calls in the conference on account 1.
During the conference call, you can do the following actions:
Press the Hold soft key to place the conference on hold.
-
Press the Split soft key to split the conference call into two individual calls on hold.
-
Press the Manage soft key, and then press
-
Press the Far Mute soft key to forbid the party from speaking. The muted party

can hear everyone, but no one can hear the muted party.
Press the Remove soft key to remove the party from the conference call.

Press the New Call soft key to place a new call.

Press the Back soft key to return to the previous screen.

Press
-
Press the EndCall soft key to drop the conference call.
-
48
or to see all parties in the conference.
or to select the call for conference and ensure that the call is active
to mute the conference call.
, , or the Send soft key.
or to select the desired party: