Yealink SIP-T41P Configuration Manual page 46

Yealink IP Phones Configuring Guide
3. Select the desired type from the KeyPad Lock Type field.
4. Enter the unlock PIN in the Phone Unlock PIN field.
5. Enter the desired interval of automatic phone lock in the Lock Time Out field.
The default timeout is 0. It means the phone will not be automatically locked. You
need to long press
If set to other values except 0 (e.g., 5), the phone will be locked when the phone is
inactive in idle screen for the designated time (in seconds).
6. Enter the emergency number in the Emergency Phone Number field.
7. Click Save changes to accept the change.
8. Perform auto provisioning on the phone to download above configurations. For
more information on how to perform auto provisioning, refer to
Configuration Files
Note
The emergency number setting, if desired, must be set before lock activation.
You can dial the emergency number even through the phone is locked.
To unlock the phone via phone user interface:
1. Press any locked key, the LCD screen prompts "Unlock PIN".
2. Enter the PIN in the Unlock PIN field.
3. Press the OK soft key to unlock the phone.
The icon disappears from the LCD screen.
You can long press
phone again.
Note
You can also unlock the phone by entering administrator password. When you enter the
administrator password to unlock the phone, the phone will turn to the Reset Phone PIN
interface.
38
to lock it immediately when the phone is idle.
on page 7.
or wait for a period of time (if configured) to lock the
Downloading