Yealink SIP-T41P Configuration Manual page 16

Yealink IP Phones Configuring Guide
To trigger auto provisioning via powered on:
1. After powered on, the LCD screen will be displayed as below:
2. Press the Login soft key to enter the Auto Provision screen.
3. Enter the user name (e.g., 9702981673) and account password in the User name
and Password field respectively.
4. Press the OK soft key.
The phone will reboot. During reboot, the phone will send the username and the
password to the server for authentication. If successful, the phone will complete
deployment after reboot. Then you can access the features you configured on the
CommPortal phone configurator via your phone.
Long press
Note
provisioning.
You can use Auto Provision Now method to trigger the IP phone to perform the auto
provisioning immediately. Before performing the auto provisioning, you need to enter
the provisioning server address manually.
To trigger auto provisioning via auto provision now:
1. Press Menu->Settings->Advanced Settings->Auto Provision.
2. Enter the provisioning server address (e.g., http:// example.com /sip-ps/) in the
Server URL field.
3. Press the Save soft key.
The LCD screen will be displayed as below:
4. Press the Ok soft key.
8
can reboot the phone. This will also trigger the phone to perform auto